RetubeCo's tube support plate & tubesheet hole preparation tools & tooling packages are fabricated in our in-house machine shop, and have been field-tested on more than hundreds of heat exchanger, condenser, and boiler retubing jobs.
We supply sufficient quantities of state-of-the-art tube support plate & tubesheet hole preparation tools when you need them, regardless of project size.
 |
400 RPM Drill: This pneumatic drill is used to power many of the tubesheet cleaning tools such as Ball Burrs and Brushes. |
 |
Ball Burr: Carbide Ball Burrs are used to clean support plates prior to new tube installation. This tool has a left hand cut, right hand helix with a 1/2" diameter shank. Stock sizes are available for most jobs. Use with 400 rpm drill. |
 |
Tube Sheet Hole Brush: Double spiral stainless steel brush is used to clean tubesheet holes prior to new tube installation. Brushes are sized for the tubesheet hole to allow cleaning without removing tubesheet material. |
Contact RetubeCo for tube support plate & tubesheet hole preparation tooling packages not listed, or to request custom fabricated tooling.